Water hardness in Ann Arbor, MI

Water in Ann Arbor is very hard, with a median of 338 mg/L (19.7 grains per gallon) across 11 monitoring sites within 10 miles.

125% harder than the Michigan median (150 mg/L) 29th hardest of 101 Michigan towns Population 119,381
338mg/L
19.7 grains per gallon
Very hard

Large city utilities sometimes soften, blend or import water from distant reservoirs, so tap water in Ann Arbor can differ from local source water. Your utility's annual Consumer Confidence Report lists the exact tap value.

Ann Arbor tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 338 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 19.7 gpg (18.9 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites11
Lab samples25
Sample years2000–2016
Middle 50% of sites270–384 mg/L
Groundwater (wells, springs)361 mg/L · 7 sites
Surface water (rivers, lakes)266 mg/L · 4 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Ann Arbor

Prefilled with Ann Arbor's measured local hardness of 338 mg/L (19.8 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Ann Arbor tap water

The City of Ann Arbor water system is the main public water system for Ann Arbor. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Mar 2023 – Dec 2023. 3 PFAS were detected.

ChemicalHighest resultDetected inEPA limit
PFBA
perfluorobutanoic acid
6.1 ppt 1 of 4 samples —
PFPeA
perfluoropentanoic acid
4.7 ppt 3 of 4 samples —
PFHxA
perfluorohexanoic acid
3.5 ppt 1 of 4 samples —

Other water systems serving parts of Ann Arbor

Water systemPFAS detectedHighest PFOA / PFOSTested
Pittsfield Township
serves over 10,000 people
None detected — Dec 2023 – Sep 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Ann Arbor

The City of Ann Arbor water system reported 25,875 service lines (the pipes connecting homes to the water main) in its inventory. 0 are lead and 471 are galvanized lines that must be replaced, and 2 are still of unknown material.

0lead (0%)
471galvanized requiring replacement
2unknown material (<1%)
25,402not lead (98%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask the City of Ann Arbor water system whether your address is on its list.

Other water systems serving parts of Ann Arbor

Water systemService linesTotal
Pittsfield Township0 lead · 0 galvanized · 0 unknown7,785

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Ann Arbor drinking water violations

EPA records show no health-based violations for the City of Ann Arbor water system since 2016. It also had 2 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Ann Arbor

Water systemHealth-based violationsMonitoring/reporting
Pittsfield TownshipNone6

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Ann Arbor

SiteTypeDistanceMedianSamplesYears
HURON RIVER AT ANN ARBOR, MI
USGS Michigan Water Science Center
Stream 0.7 mi261 mg/L82011–2013
URB161-02
USGS Michigan Water Science Center
Well 5 mi318 mg/L22006–2016
DWS161-1
USGS Michigan Water Science Center
Well 5.4 mi361 mg/L12016
URB161-01
USGS Michigan Water Science Center
Well 5.4 mi500 mg/L22006–2016
DWS161-3
USGS Michigan Water Science Center
Well 6.1 mi338 mg/L12016
URB161-03
USGS Michigan Water Science Center
Well 6.1 mi416 mg/L62002–2016

Water hardness in towns near Ann Arbor

TownDistanceMedianClass
Ypsilanti6 mi 275 mg/LVery hard
South Lyon13 mi 354 mg/LVery hard
Wayne18 mi 270 mg/LVery hard
Westland18 mi 300 mg/LVery hard
Novi19 mi 320 mg/LVery hard
Romulus19 mi 270 mg/LVery hard
Wixom20 mi 315 mg/LVery hard
Livonia20 mi 343 mg/LVery hard
Garden City20 mi 300 mg/LVery hard
Inkster21 mi 270 mg/LVery hard

Washtenaw County

Ann Arbor is in Washtenaw County, where the median is 252 mg/L (very hard) across 32 sites.

See all of Washtenaw County →

Michigan

The statewide median is 150 mg/L (hard) from 1,435 sites.

Michigan hardness map →

Ann Arbor, MI water: common questions

Do I need a water softener in Ann Arbor?

Very likely. Water measured around Ann Arbor is 19.7 gpg (338 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 34,000 grains.Size it for your household →

Who supplies Ann Arbor's drinking water?

The main public water system serving Ann Arbor in EPA records is ANN Arbor. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Ann Arbor?

It depends on what you want to remove. In Ann Arbor, EPA testing found PFBA, PFPeA and PFHxA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next