Water hardness in Annapolis, MD

Water in Annapolis is moderately hard, with a median of 106 mg/L (6.2 grains per gallon) across 28 monitoring sites within 10 miles.

89% harder than the Maryland median (56 mg/L) 44th hardest of 121 Maryland towns Population 40,552
106mg/L
6.2 grains per gallon
Moderately hard

Annapolis tap water at a glance

  • HardnessModerately hard (106 mg/L, 6.2 gpg, local measurements). Some scale; descale kettles and flush the water heater.Water heater care →
  • PFASNone found in EPA's nationwide testing of the main water system.PFAS results →
  • Lead pipesNo known lead lines; 6,943 lines are still of unknown material.Check your own pipe →
  • ViolationsNo health-based violations since 2016.EPA record →

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 106 mg/L means at home

  • Water softener: Most homes do not need a softener. You may notice light spotting on glass and fixtures.
  • Dishwasher: set the water hardness to about 6.2 gpg (5.9 °dH), which is a low-to-medium hardness setting.
  • Kettles and coffee makers: descaling every 3–6 months is usually enough.
  • Laundry and soap: soap lathers easily and detergent goes further.
  • Water heater: routine flushing every 2–3 years is typically fine.

Where the number comes from

Monitoring sites28
Lab samples28
Sample years2000–2017
Middle 50% of sites25–154 mg/L
Groundwater (wells, springs)116 mg/L · 26 sites
Surface water (rivers, lakes)75 mg/L · 2 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Annapolis

Prefilled with Annapolis's measured local hardness of 106 mg/L (6.2 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Annapolis tap water

City of Annapolis is the main public water system for Annapolis. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 2 samples taken Dec 2023 – Jun 2024. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Annapolis

Water systemPFAS detectedHighest PFOA / PFOSTested
Broad Creek
serves over 10,000 people
None detected — Jun 2023 – Dec 2023

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Annapolis

City of Annapolis reported 6,970 service lines (the pipes connecting homes to the water main) in its inventory. 0 are lead and 27 are galvanized lines that must be replaced, and 6,943 are still of unknown material.

0lead (0%)
27galvanized requiring replacement
6,943unknown material (100%)
0not lead (0%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask City of Annapolis whether your address is on its list.

Other water systems serving parts of Annapolis

Water systemService linesTotal
Broad Creek0 lead · 0 galvanized · 245 unknown245

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Annapolis drinking water violations

EPA records show no health-based violations for City of Annapolis since 2016. It also had 1 monitoring or reporting violation (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Annapolis

Water systemHealth-based violationsMonitoring/reporting
Broad CreekNone3

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Annapolis

SiteTypeDistanceMedianSamplesYears
AA Df 103
USGS Maryland Water Science Center
Well 3.2 mi37 mg/L12002
AA Ce 119
USGS Maryland Water Science Center
Well 3.4 mi156 mg/L12012
AA Cf 155
USGS Maryland Water Science Center
Well 4.2 mi21 mg/L12010
AA Cf 119
USGS Maryland Water Science Center
Well 4.4 mi18 mg/L12010
AA Ee 107
USGS Maryland Water Science Center
Well 5.3 mi176 mg/L12009
AA Ee 108
USGS Maryland Water Science Center
Well 5.5 mi266 mg/L12011

Water hardness in towns near Annapolis

TownDistanceMedianClass
Annapolis Neck2 mi 130 mg/LHard
Parole3 mi 53 mg/LSoft
Arnold5 mi 21 mg/LSoft
Lake Shore8 mi 23 mg/LSoft
Severna Park9 mi 23 mg/LSoft
Crofton10 mi 44 mg/LSoft
Odenton12 mi 23 mg/LSoft
Bowie13 mi 67 mg/LModerately hard
Pasadena13 mi 37 mg/LSoft
Riviera Beach13 mi 24 mg/LSoft

Anne Arundel County

Annapolis is in Anne Arundel County, where the median is 95 mg/L (moderately hard) across 57 sites.

See all of Anne Arundel County →

Maryland

The statewide median is 56 mg/L (soft) from 1,412 sites.

Maryland hardness map →

Annapolis, MD water: common questions

Do I need a water softener in Annapolis?

Probably not. Water measured around Annapolis is 6.2 gpg (106 mg/L, measured locally), under the 7 gpg (120 mg/L) level where scale on fixtures and appliances becomes noticeable. If spotting bothers you, about 11,000 grains of capacity covers a 3-person home between weekly regenerations.Size it for your household →

Who supplies Annapolis's drinking water?

The main public water system serving Annapolis in EPA records is City of Annapolis. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Annapolis?

Not for anything in EPA's records: no PFAS found in EPA testing, no lead service lines reported and no health-based violations since 2016. People here who use a filter usually do it for taste, such as chlorine.Chlorine taste in tap water →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next