Water hardness in Ashland, KY
Water in Ashland is hard, with a median of 174 mg/L (10.2 grains per gallon) across 3 monitoring sites within 10 miles.
Ashland tap water at a glance
- HardnessHard (174 mg/L, 10.2 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- PFAS1 found in EPA testing; every result with a federal limit was at or below it.PFAS results →
- Lead pipesNo known lead lines; 12,744 lines are still of unknown material.Check your own pipe →
- Violations6 health-based violations since 2016.What they were →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 174 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 10.2 gpg (9.7 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Ashland
Prefilled with Ashland's measured local hardness of 174 mg/L (10.2 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Ashland tap water
Ashland Water Works is the main public water system for Ashland. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken May 2024 – Feb 2025. 1 PFAS was detected.
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFPeA perfluoropentanoic acid | 24 ppt | 2 of 4 samples | — |
Other water systems serving parts of Ashland
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Big Sandy Water District serves over 10,000 people | HFPO-DA, PFBS, PFPeA | — | Dec 2023 – Oct 2024 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Ashland
Ashland Water Works reported 14,058 service lines (the pipes connecting homes to the water main) in its inventory. It reported no known lead lines, but 12,744 lines are still of unknown material.
Other water systems serving parts of Ashland
| Water system | Service lines | Total |
|---|---|---|
| Big Sandy Water District | 0 lead · 0 galvanized · 609 unknown | 5,077 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Ashland drinking water violations
EPA records show 6 health-based violations for Ashland Water Works since 2016, all since resolved or closed. The most recent began in Apr 2017. It also had 11 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
| Contaminant or rule | Type | Violations | Most recent | Status |
|---|---|---|---|---|
| Total trihalomethanes (TTHM) byproducts formed when chlorine reacts with natural matter in water · what it means highest measured 0.098 MG/L; limit 0.080 mg/L | Contaminant above legal limit | 4 | Apr 2017 | Resolved/closed |
| Haloacetic acids (HAA5) byproducts of chlorine disinfection · what it means highest measured 0.068 MG/L; limit 0.060 mg/L | Contaminant above legal limit | 2 | Oct 2016 | Resolved/closed |
Other water systems serving parts of Ashland
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Big Sandy Water District | 20 | 4 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Ashland
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| HOOD CREEK NEAR ASHLAND Kentucky Division of Water | River/Stream | 2.9 mi | 204 mg/L | 20 | 2002–2007 |
| EAST FORK LITTLE SANDY RIVER NEAR CANNONSBURG Kentucky Division of Water | River/Stream | 7.2 mi | 123 mg/L | 23 | 2002–2007 |
| EAST FORK LITTLE SANDY RIVER NEAR DANLEYTON Kentucky Division of Water | River/Stream | 7.6 mi | 174 mg/L | 23 | 2002–2007 |
Water hardness in towns near Ashland
| Town | Distance | Median | Class |
|---|---|---|---|
| Paris | 90 mi | 212 mg/L | Very hard |
| Alexandria | 100 mi | 124 mg/L | Hard |
| Richmond | 103 mi | 214 mg/L | Very hard |
| Fort Thomas | 107 mi | 124 mg/L | Hard |
| Berea | 108 mi | 214 mg/L | Very hard |
| Newport | 108 mi | 124 mg/L | Hard |
| Florence | 114 mi | 128 mg/L | Hard |
| Burlington | 118 mi | 128 mg/L | Hard |
| Frankfort | 122 mi | 175 mg/L | Hard |
| Lawrenceburg | 126 mi | 178 mg/L | Hard |
Boyd County
Ashland is in Boyd County, where the median is 163 mg/L (hard) across 2 sites.
See all of Boyd County →Ashland, KY water: common questions
Do I need a water softener in Ashland?
Many homes here use one. Water measured around Ashland is 10.2 gpg (174 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 18,000 grains.Size it for your household →
Who supplies Ashland's drinking water?
The main public water system serving Ashland in EPA records is Ashland Water Works. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Ashland?
It depends on what you want to remove. In Ashland, EPA testing found PFPeA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system had 6 health-based violations since 2016, for TTHM and Total Haloacetic Acids (HAA5); the utility's annual report says what was done about them. On the other hand, no lead service lines reported. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Which water filters remove PFAS?EPA tests found 1 PFAS in Ashland's main water system.
- How to tell if your home has a lead pipe12,744 service lines here are of unknown material.
- TTHM in drinking waterDisinfection byproducts appear in this system's violation record.