Water hardness in Troy, IL

Water in Troy is very hard, with a median of 441 mg/L (25.7 grains per gallon) across 18 monitoring sites within 10 miles.

51% harder than the Illinois median (293 mg/L) 1st hardest of 225 Illinois towns Population 11,209
441mg/L
25.7 grains per gallon
Very hard

Troy tap water at a glance

  • HardnessVery hard (441 mg/L, 25.7 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • PFAS1 found in EPA testing; every result with a federal limit was at or below it.PFAS results →
  • Lead pipesNo lead service lines reported.Details →
  • ViolationsNo health-based violations since 2016.EPA record →

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 441 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 25.7 gpg (24.7 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites18
Lab samples90
Sample years2000–2023
Middle 50% of sites286–498 mg/L
Groundwater (wells, springs)500 mg/L · 9 sites
Surface water (rivers, lakes)285 mg/L · 9 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Troy

Prefilled with Troy's measured local hardness of 441 mg/L (25.8 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Troy tap water

The City of Troy water system is the main public water system for Troy. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 2 samples taken Sep 2024 – Mar 2025. 1 PFAS was detected.

ChemicalHighest resultDetected inEPA limit
PFBS
perfluorobutane sulfonic acid
3.9 ppt 1 of 2 samples —

Other water systems serving parts of Troy

Water systemPFAS detectedHighest PFOA / PFOSTested
Caseyville
serves over 10,000 people
PFBA — Oct 2024 – Jul 2025
Glen Carbon
serves over 10,000 people
PFBA, PFHxA, PFPeA — Aug 2023 – Jun 2024
Collinsville
serves over 10,000 people
PFHxA, PFPeA, PFOA +5 more 18 / 8.9 ppt Feb 2024 – Aug 2024
IL American-Granite City
serves over 10,000 people
PFBA, PFPeA, PFHxA — Nov 2023 – Aug 2024
IL American-East ST Louis
serves over 10,000 people
PFBA, PFHxA, PFPeA — Nov 2023 – Aug 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Troy

The City of Troy water system reported 6,762 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.

0lead (0%)
0galvanized requiring replacement
0unknown material (0%)
6,762not lead (100%)

Other water systems serving parts of Troy

Water systemService linesTotal
Caseyville0 lead · 0 galvanized · 0 unknown6,239
Glen Carbon1 lead · 70 galvanized · 151 unknown5,588
Collinsville23 lead · 0 galvanized · 451 unknown12,587
IL American-Granite City697 lead · 130 galvanized · 12,306 unknown21,217
IL American-East ST Louis749 lead · 351 galvanized · 34,431 unknown71,163

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Troy drinking water violations

EPA records show no health-based violations for the City of Troy water system since 2016. It also had 2 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Troy

Water systemHealth-based violationsMonitoring/reporting
CaseyvilleNone4
Glen CarbonNone5
CollinsvilleNone0
IL American-Granite CityNone1
IL American-East ST LouisNone1

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Troy

SiteTypeDistanceMedianSamplesYears
Troy Creek
illinois epa (State)
River/Stream 1.1 mi490 mg/L12002
Trojan Creek
illinois epa (State)
River/Stream 1.2 mi486 mg/L12002
Troy Creek
illinois epa (State)
River/Stream 1.5 mi489 mg/L12002
Wendell Branch
illinois epa (State)
River/Stream 1.5 mi197 mg/L12002
Wendell Branch
illinois epa (State)
River/Stream 1.6 mi290 mg/L12002
Silver Creek
illinois epa (State)
River/Stream 3.3 mi278 mg/L312000–2003

Water hardness in towns near Troy

TownDistanceMedianClass
Glen Carbon6 mi 416 mg/LVery hard
Edwardsville7 mi 396 mg/LVery hard
Collinsville8 mi 416 mg/LVery hard
O'Fallon10 mi 372 mg/LVery hard
Fairview Heights12 mi 363 mg/LVery hard
Shiloh13 mi 348 mg/LVery hard
Granite City13 mi 398 mg/LVery hard
Wood River14 mi 358 mg/LVery hard
Swansea14 mi 368 mg/LVery hard
East St. Louis16 mi 386 mg/LVery hard

Madison County

Troy is in Madison County, where the median is 339 mg/L (very hard) across 34 sites.

See all of Madison County →

Illinois

The statewide median is 293 mg/L (very hard) from 1,100 sites.

Illinois hardness map →

Troy, IL water: common questions

Do I need a water softener in Troy?

Very likely. Water measured around Troy is 25.7 gpg (441 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 45,000 grains.Size it for your household →

Who supplies Troy's drinking water?

The main public water system serving Troy in EPA records is TROY. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Troy?

It depends on what you want to remove. In Troy, EPA testing found PFBS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next