Water hardness in Bloomingdale, FL
Water in Bloomingdale is hard, with a median of 129 mg/L (7.5 grains per gallon) across 25 monitoring sites within 10 miles.
Bloomingdale tap water at a glance
- HardnessHard (129 mg/L, 7.5 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 129 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 7.5 gpg (7.2 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Bloomingdale
Prefilled with Bloomingdale's measured local hardness of 129 mg/L (7.5 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Bloomingdale tap water
Bloomingdale is served by more than one water system. These systems supply ZIP codes in Bloomingdale and were tested for PFAS ("forever chemicals") in EPA's nationwide UCMR 5 study. Check your water bill to see which one is yours.
Water systems serving Bloomingdale
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Hcpud/South-Central serves over 10,000 people | PFPeA, PFHxA, PFBA +3 more | ND / 5.4 ppt | Jul 2023 – Apr 2024 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Bloomingdale
Bloomingdale is served by more than one water system. Their service line inventories, as reported to EPA:
Water systems serving Bloomingdale
| Water system | Service lines | Total |
|---|---|---|
| HCWRD/South-Central | 0 lead · 0 galvanized · 0 unknown | 145,969 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Bloomingdale drinking water violations
Bloomingdale is served by more than one water system. Health-based violations recorded by EPA since 2016:
Water systems serving Bloomingdale
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Hcpud/South-Central | None | 0 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Bloomingdale
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| Z4LR11025 FL Dept. of Environmental Protection | River/Stream | 1.6 mi | 252 mg/L | 1 | 2017 |
| Z4SS8035 FL Dept. of Environmental Protection | River/Stream | 1.8 mi | 63 mg/L | 1 | 2014 |
| BUCKHORN SPRINGS BH-2A NRSD WELL NEAR BRANDON FL USGS Florida Water Science Center | Well | 2.1 mi | 132 mg/L | 1 | 2000 |
| Z4LR10004 FL Dept. of Environmental Protection | River/Stream | 2.3 mi | 146 mg/L | 1 | 2016 |
| Z4LR8013 FL Dept. of Environmental Protection | River/Stream | 2.9 mi | 226 mg/L | 1 | 2014 |
| ALAFIA RIVER FL Dept. of Environmental Protection | River/Stream | 3.1 mi | 180 mg/L | 65 | 2011–2017 |
Water hardness in towns near Bloomingdale
| Town | Distance | Median | Class |
|---|---|---|---|
| Fish Hawk | 3 mi | 132 mg/L | Hard |
| Valrico | 3 mi | 129 mg/L | Hard |
| Riverview | 4 mi | 135 mg/L | Hard |
| Brandon | 5 mi | 190 mg/L | Very hard |
| Palm River-Clair Mel | 8 mi | 218 mg/L | Very hard |
| Gibsonton | 8 mi | 134 mg/L | Hard |
| Mango | 8 mi | 190 mg/L | Very hard |
| East Lake-Orient Park | 11 mi | 193 mg/L | Very hard |
| Apollo Beach | 12 mi | 151 mg/L | Hard |
| Thonotosassa | 12 mi | 194 mg/L | Very hard |
Hillsborough County
Bloomingdale is in Hillsborough County, where the median is 162 mg/L (hard) across 179 sites.
See all of Hillsborough County →Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.