Water hardness in Washington, DC

Water in Washington is hard, with a median of 142 mg/L (8.3 grains per gallon) across 48 monitoring sites within 10 miles.

about the same as the District of Columbia median (142 mg/L) 1st hardest of 1 District of Columbia towns Population 678,972
142mg/L
8.3 grains per gallon
Hard

Large city utilities sometimes soften, blend or import water from distant reservoirs, so tap water in Washington can differ from local source water. Your utility's annual Consumer Confidence Report lists the exact tap value.

Washington tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 142 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 8.3 gpg (8 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites48
Lab samples104
Sample years2005–2022
Middle 50% of sites55–182 mg/L
Groundwater (wells, springs)121 mg/L · 40 sites
Surface water (rivers, lakes)184 mg/L · 8 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Washington

Prefilled with Washington's measured local hardness of 142 mg/L (8.3 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Washington tap water

DC Water supplies Washington. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 8 samples taken Jan 2024 – Oct 2024. 2 PFAS were detected.

ChemicalHighest resultDetected inEPA limit
PFPeA
perfluoropentanoic acid
4.7 ppt 2 of 8 samples —
PFHxA
perfluorohexanoic acid
3.1 ppt 1 of 8 samples —

Other water systems serving parts of Washington

Water systemPFAS detectedHighest PFOA / PFOSTested
Naval Station Washington - WNY
serves over 10,000 people
PFPeA, PFHxA — Jan 2024 – Oct 2024
Joint Base Anacostia - Bolling
serves over 10,000 people
PFPeA, PFHxA — Mar 2023 – Dec 2023

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · DC Water · Methodology

Lead pipes in Washington

DC Water reported 137,166 service lines (the pipes connecting homes to the water main) in its inventory. 16,935 are lead and 190 are galvanized lines that must be replaced, and 13,388 are still of unknown material.

16,935lead (12%)
190galvanized requiring replacement
13,388unknown material (10%)
106,653not lead (78%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask DC Water whether your address is on its list.

Other water systems serving parts of Washington

Water systemService linesTotal
Naval Station Washington - WNY0 lead · 23 galvanized · 4 unknown90
Joint Base Anacostia - Bolling0 lead · 7 galvanized · 35 unknown1,121

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · DC Water · Methodology

Washington drinking water violations

EPA records show no health-based violations for DC Water since 2016. It also had 4 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Washington

Water systemHealth-based violationsMonitoring/reporting
Naval Station Washington - WNY414
Joint Base Anacostia - Bolling529

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · DC Water · Methodology

Monitoring sites closest to Washington

SiteTypeDistanceMedianSamplesYears
WW Bc 8
USGS Maryland Water Science Center
Well 1.3 mi138 mg/L22005–2016
WE Ca 32
USGS Maryland Water Science Center
Well 1.4 mi210 mg/L42005–2016
WE Ca 33
USGS Maryland Water Science Center
Well 1.4 mi149 mg/L12005
WW Bc 9
USGS Maryland Water Science Center
Well 1.6 mi93 mg/L52005–2016
WW Cc 38
USGS Maryland Water Science Center
Well 1.7 mi37 mg/L22016
WW Bc 10
USGS Maryland Water Science Center
Well 2.6 mi496 mg/L22008–2016

District of Columbia

Washington is in District of Columbia, where the median is 142 mg/L (hard) across 48 sites.

See all of District of Columbia →

District of Columbia

The statewide median is 142 mg/L (hard) from 48 sites.

District of Columbia hardness map →

Washington, DC water: common questions

Do I need a water softener in Washington?

Many homes here use one. Water measured around Washington is 8.3 gpg (142 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 15,000 grains.Size it for your household →

Who supplies Washington's drinking water?

The main public water system serving Washington in EPA records is D.C. Water and Sewer Authority. Some neighborhoods may be served by a different system, so check the name on your water bill.Utility website →

Do I need a water filter in Washington?

It depends on what you want to remove. In Washington, EPA testing found PFPeA and PFHxA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system reports 16,935 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next