Water hardness in Burbank, CA
Water in Burbank is very hard, with a median of 282 mg/L (16.5 grains per gallon) across 19 monitoring sites within 10 miles.
Large city utilities sometimes soften, blend or import water from distant reservoirs, so tap water in Burbank can differ from local source water. Your utility's annual Consumer Confidence Report lists the exact tap value.
Burbank tap water at a glance
- HardnessVery hard (282 mg/L, 16.5 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFAS3 found in EPA testing; every result with a federal limit was at or below it.PFAS results →
- Lead pipesNo lead service lines reported.Details →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 282 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 16.5 gpg (15.8 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Burbank
Prefilled with Burbank's measured local hardness of 282 mg/L (16.5 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Burbank tap water
Burbank-City, Water Dept. is the main public water system for Burbank. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken May 2024 – Feb 2025. 3 PFAS were detected.
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFPeA perfluoropentanoic acid | 10.2 ppt | 4 of 4 samples | — |
| PFBA perfluorobutanoic acid | 8.1 ppt | 4 of 4 samples | — |
| PFHxA perfluorohexanoic acid | 4.4 ppt | 3 of 4 samples | — |
Other water systems serving parts of Burbank
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Los Angeles-City, Dept. of Water & Power serves over 10,000 people | None detected | — | Dec 2023 – Sep 2024 |
| Western MWD serves over 10,000 people | PFPeA, PFHxS, PFBS | — | Mar 2023 – Jan 2024 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Burbank
Burbank-City, Water Dept. reported 25,745 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.
Other water systems serving parts of Burbank
| Water system | Service lines | Total |
|---|---|---|
| Los Angeles-City, Dept. of Water & Power | 0 lead · 0 galvanized · 0 unknown | 744,960 |
| Western MWD | 0 lead · 0 galvanized · 0 unknown | 23,306 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Burbank drinking water violations
EPA records show no health-based violations for Burbank-City, Water Dept. since 2016. It also had 5 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Burbank
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Los Angeles-City, Dept. of Water & Power | 2 | 2 |
| Western MWD | None | 0 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Burbank
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| 001N014W08K002S USGS California Water Science Center | Well | 2.5 mi | 217 mg/L | 3 | 2005–2012 |
| 001N013W19F001S USGS California Water Science Center | Well | 3.2 mi | 304 mg/L | 3 | 2005–2020 |
| 002N015W35B002S USGS California Water Science Center | Well | 4.7 mi | 280 mg/L | 1 | 2005 |
| 001N013W29P001S USGS California Water Science Center | Well | 4.9 mi | 378 mg/L | 1 | 2005 |
| 001N015W02R001S USGS California Water Science Center | Well | 5.1 mi | 534 mg/L | 2 | 2015–2020 |
| 001N013W10B001S USGS California Water Science Center | Well | 5.5 mi | 390 mg/L | 5 | 2005–2020 |
Water hardness in towns near Burbank
| Town | Distance | Median | Class |
|---|---|---|---|
| Glendale | 5 mi | 250 mg/L | Very hard |
| La Crescenta-Montrose | 6 mi | 250 mg/L | Very hard |
| La Cañada Flintridge | 7 mi | 207 mg/L | Very hard |
| West Hollywood | 7 mi | 302 mg/L | Very hard |
| Beverly Hills | 9 mi | 285 mg/L | Very hard |
| San Fernando | 9 mi | 298 mg/L | Very hard |
| Altadena | 11 mi | 184 mg/L | Very hard |
| Pasadena | 11 mi | 192 mg/L | Very hard |
| South Pasadena | 11 mi | 238 mg/L | Very hard |
| Los Angeles | 13 mi | 170 mg/L | Hard |
Los Angeles County
Burbank is in Los Angeles County, where the median is 200 mg/L (very hard) across 552 sites.
See all of Los Angeles County →Burbank, CA water: common questions
Do I need a water softener in Burbank?
Very likely. Water measured around Burbank is 16.5 gpg (282 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 29,000 grains.Size it for your household →
Who supplies Burbank's drinking water?
The main public water system serving Burbank in EPA records is Burbank-City, Water Dept.. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Burbank?
It depends on what you want to remove. In Burbank, EPA testing found PFPeA, PFBA and PFHxA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Which water filters remove PFAS?EPA tests found 3 PFAS in Burbank's main water system.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.