Water hardness in Florence, AZ
Water in Florence is very hard, with a median of 360 mg/L (21 grains per gallon) across 16 monitoring sites within 10 miles.
Florence tap water at a glance
- HardnessVery hard (360 mg/L, 21 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFAS3 found in EPA testing; every result with a federal limit was at or below it.PFAS results →
- Lead pipesNo known lead lines; 3,284 lines are still of unknown material.Check your own pipe →
- Violations1 health-based violation since 2016.What they were →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 360 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 21 gpg (20.2 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Florence
Prefilled with Florence's measured local hardness of 360 mg/L (21.1 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Florence tap water
Florence Water Company is the main public water system for Florence. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 9 samples taken Sep 2023 – Jun 2026. 3 PFAS were detected. Every result with a federal limit was at or below it.
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFBS perfluorobutane sulfonic acid | 60 ppt | 3 of 9 samples | — |
| PFBA perfluorobutanoic acid | 9 ppt | 1 of 9 samples | — |
| PFHxS perfluorohexane sulfonic acid | 7 ppt | 2 of 9 samples | 10 ppt* |
Other water systems serving parts of Florence
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Epcor - San Tan serves over 10,000 people | None detected | — | Jul 2024 – Jan 2025 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Florence
Florence Water Company reported 3,751 service lines (the pipes connecting homes to the water main) in its inventory. 0 are lead and 4 are galvanized lines that must be replaced, and 3,284 are still of unknown material.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Florence Water Company whether your address is on its list.
Other water systems serving parts of Florence
| Water system | Service lines | Total |
|---|---|---|
| Epcor - San Tan | 0 lead · 0 galvanized · 0 unknown | 41,895 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Florence drinking water violations
EPA records show 1 health-based violation for Florence Water Company since 2016, all since resolved or closed. The most recent began in Jan 2025. It also had 16 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
| Contaminant or rule | Type | Violations | Most recent | Status |
|---|---|---|---|---|
| Nitrate from fertilizer, septic systems and manure · what it means highest measured 12.9 MG/L; limit 10 mg/L | Contaminant above legal limit | 1 | Jan 2025 | Resolved/closed |
Other water systems serving parts of Florence
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Epcor - San Tan | 2 | 53 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Florence
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| 006225 AZDEQ_GW | Well | 1.9 mi | 335 mg/L | 2 | 2005 |
| D-05-09 02ADA USGS Arizona Water Science Center | Well | 3.3 mi | 651 mg/L | 1 | 2013 |
| 45549 AZDEQ_GW | Well | 3.4 mi | 425 mg/L | 2 | 2005 |
| D-04-09 06AAA2 USGS Arizona Water Science Center | Well | 4.2 mi | 619 mg/L | 3 | 2000–2008 |
| 27684 AZDEQ_GW | Well | 4.7 mi | 335 mg/L | 2 | 2005 |
| 65244 AZDEQ_GW | Well | 5.9 mi | 230 mg/L | 2 | 2005 |
Water hardness in towns near Florence
| Town | Distance | Median | Class |
|---|---|---|---|
| Coolidge | 11 mi | 385 mg/L | Very hard |
| San Tan Valley | 11 mi | 195 mg/L | Very hard |
| Queen Creek | 16 mi | 195 mg/L | Very hard |
| Apache Junction | 23 mi | 195 mg/L | Very hard |
| Casa Grande | 23 mi | 154 mg/L | Hard |
| Eloy | 25 mi | 232 mg/L | Very hard |
| Gilbert | 25 mi | 186 mg/L | Very hard |
| Arizona City | 27 mi | 220 mg/L | Very hard |
| Sun Lakes | 28 mi | 203 mg/L | Very hard |
| Mesa | 29 mi | 186 mg/L | Very hard |
Pinal County
Florence is in Pinal County, where the median is 195 mg/L (very hard) across 321 sites.
See all of Pinal County →Florence, AZ water: common questions
Do I need a water softener in Florence?
Very likely. Water measured around Florence is 21 gpg (360 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 37,000 grains.Size it for your household →
Who supplies Florence's drinking water?
The main public water system serving Florence in EPA records is Florence Water Company. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Florence?
It depends on what you want to remove. In Florence, EPA testing found PFBS, PFBA and PFHxS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system had 1 health-based violation since 2016, for Nitrate; the utility's annual report says what was done about it. On the other hand, no lead service lines reported. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Which water filters remove PFAS?EPA tests found 3 PFAS in Florence's main water system.
- How to tell if your home has a lead pipe3,284 service lines here are of unknown material.
- Nitrate in drinking waterNitrate appears in this system's violation record.