Water hardness in Monroe County, WI
Water in Monroe County is hard, with a median of 175 mg/L (10.2 grains per gallon) across 2 monitoring sites.
Monroe County water at a glance
- HardnessHard (175 mg/L, 10.2 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 175 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 10.2 gpg (9.8 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Monroe County
Prefilled with Monroe County's measured local hardness of 175 mg/L (10.2 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Monroe County on the Wisconsin map
Cities and communities in Monroe County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Sparta | 272 | Very hard | 3 sites within 10 miles |
| Tomah | 175 | Hard | county median |
| Cashton | 175 | Hard | county median |
| Norwalk | 175 | Hard | county median |
| Warrens | 175 | Hard | county median |
| Wilton | 175 | Hard | county median |
| Kendall | 175 | Hard | county median |
| Oakdale | 175 | Hard | county median |
| Cataract (CDP) | 175 | Hard | county median |
| Wyeville | 175 | Hard | county median |
| Tunnel City (CDP) | 175 | Hard | county median |
| Melvina | 175 | Hard | county median |
Water quality in Monroe County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Sparta | Sparta Waterworks | None detected | 0 lead · 186 unknown | None |
| Tomah | Tomah Waterworks | 3 found | 0 lead · 0 unknown | 11 |
| Cashton | Cashton Waterworks | Not tested | 0 lead · 0 unknown | None |
| Norwalk | Norwalk Waterworks | Not tested | 0 lead · 163 unknown | None |
| Warrens | Warrens Waterworks | Not tested | 0 lead · 0 unknown | None |
| Wilton | Wilton Waterworks | Not tested | 0 lead · 218 unknown | 2 |
| Kendall | Kendall Waterworks | Not tested | 5 lead · 0 unknown | 3 (1 open) |
| Oakdale | Oakdale Waterworks | Not tested | 0 lead · 0 unknown | 1 |
Neighboring counties
- La Crosse County228 mg/L
- Juneau County74 mg/L
- Vernon County143 mg/L
- Jackson County35 mg/L
- Richland County272 mg/L
- Adams County184 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.