Water hardness in Ashland County, WI
Water in Ashland County is moderately hard, with a median of 62 mg/L (3.6 grains per gallon) across 96 monitoring sites.
Ashland County water at a glance
- HardnessModerately hard (62 mg/L, 3.6 gpg, local measurements). Some scale; descale kettles and flush the water heater.Water heater care →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 62 mg/L means at home
- Water softener: Most homes do not need a softener. You may notice light spotting on glass and fixtures.
- Dishwasher: set the water hardness to about 3.6 gpg (3.5 °dH), which is a low-to-medium hardness setting.
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Ashland County
Prefilled with Ashland County's measured local hardness of 62 mg/L (3.6 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Ashland County on the Wisconsin map
Cities and communities in Ashland County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Ashland | 66 | Moderately hard | 39 sites within 10 miles |
| Mellen | 58 | Soft | 27 sites within 10 miles |
| Glidden (CDP) | 62 | Moderately hard | county median |
| New Odanah (CDP) | 62 | Moderately hard | 62 sites within 10 miles |
| Butternut | 62 | Moderately hard | county median |
| Birch Hill (CDP) | 62 | Moderately hard | 56 sites within 10 miles |
| Franks Field (CDP) | 62 | Moderately hard | 64 sites within 10 miles |
| Marengo (CDP) | 63 | Moderately hard | 36 sites within 10 miles |
| Diaperville (CDP) | 62 | Moderately hard | 65 sites within 10 miles |
| Clam Lake (CDP) | 62 | Moderately hard | county median |
| Odanah (CDP) | 63 | Moderately hard | 69 sites within 10 miles |
| Bayfront (CDP) | 64 | Moderately hard | 53 sites within 10 miles |
| Jolmaville (CDP) | 62 | Moderately hard | 48 sites within 10 miles |
Water quality in Ashland County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Ashland | Ashland Water Utility | None detected | 536 lead · 471 unknown | 12 |
| Mellen | Mellen Water Utility | Not tested | 0 lead · 0 unknown | None |
| Glidden | Glidden Sanitary District | Not tested | 0 lead · 293 unknown | 2 |
| Butternut | Butternut Waterworks | Not tested | 0 lead · 102 unknown | 8 (1 open) |
| Marengo | Aspen Ridge | Not tested | 0 lead · 24 unknown | None |
Neighboring counties
- Bayfield County59 mg/L
- Iron County56 mg/L
- Sawyer County41 mg/L
- Douglas County81 mg/L
- Price County38 mg/L
- Vilas County34 mg/L
Hardness scale
What to read next
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.