Water hardness in Fall River County, SD
Water in Fall River County is very hard, with a median of 484 mg/L (28.3 grains per gallon) across 26 monitoring sites.
Fall River County water at a glance
- HardnessVery hard (484 mg/L, 28.3 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 484 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 28.3 gpg (27.1 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Fall River County
Prefilled with Fall River County's measured local hardness of 484 mg/L (28.3 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Fall River County on the South Dakota map
Cities and communities in Fall River County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Hot Springs | 351 | Very hard | 43 sites within 10 miles |
| Edgemont | 1,096 | Very hard | 3 sites within 10 miles |
| Oelrichs | 484 | Very hard | county median |
| Angostura (CDP) | 571 | Very hard | 10 sites within 10 miles |
| Ardmore (CDP) | 484 | Very hard | county median |
| Dudley (CDP) | 1,096 | Very hard | 3 sites within 10 miles |
| Maverick Junction (CDP) | 432 | Very hard | 27 sites within 10 miles |
| Oral (CDP) | 484 | Very hard | county median |
| Provo (CDP) | 484 | Very hard | county median |
| Smithwick (CDP) | 484 | Very hard | county median |
Water quality in Fall River County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Hot Springs | Hot Springs | None detected | 0 lead · 1,445 unknown | None |
| Edgemont | Edgemont | Not tested | 0 lead · 489 unknown | 2 |
| Oelrichs | Oelrichs | Not tested | 0 lead · 4 unknown | None |
| Oral | Fall River Wud | Not tested | 0 lead · 404 unknown | 1 |
Neighboring counties
- Custer County233 mg/L
- Oglala Lakota County308 mg/L
- Pennington County261 mg/L
- Lawrence County269 mg/L
- Jackson County190 mg/L
- Meade County710 mg/L
South Dakota
The statewide median is 410 mg/L (very hard) from 498 sites.
South Dakota hardness map →Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.