Water hardness in Moultrie County, IL
Water in Moultrie County is very hard, with a median of 345 mg/L (20.2 grains per gallon) across 6 monitoring sites.
Moultrie County water at a glance
- HardnessVery hard (345 mg/L, 20.2 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 345 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 20.2 gpg (19.3 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Moultrie County
Prefilled with Moultrie County's measured local hardness of 345 mg/L (20.2 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Moultrie County on the Illinois map
Cities and communities in Moultrie County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Sullivan | 345 | Very hard | 6 sites within 10 miles |
| Arthur | 353 | Very hard | 5 sites within 10 miles |
| Bethany | 364 | Very hard | 3 sites within 10 miles |
| Lovington | 357 | Very hard | 4 sites within 10 miles |
| Dalton City | 340 | Very hard | 3 sites within 10 miles |
| Gays | 310 | Very hard | 4 sites within 10 miles |
| Allenville | 335 | Very hard | 6 sites within 10 miles |
| Lake City (CDP) | 340 | Very hard | 3 sites within 10 miles |
Water quality in Moultrie County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Sullivan | Sullivan | None detected | 0 lead · 0 unknown | None |
| Arthur | Arthur | Not tested | 0 lead · 0 unknown | None |
| Bethany | Bethany | Not tested | 0 lead · 0 unknown | None |
| Lovington | Lovington | Not tested | 0 lead · 0 unknown | None |
| Dalton City | Dalton City | Not tested | Not reported | None |
Neighboring counties
- Shelby County252 mg/L
- Coles County281 mg/L
- Douglas County294 mg/L
- Macon County295 mg/L
- Piatt County326 mg/L
- Cumberland County254 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.