Water hardness in Montgomery County, IL
Water in Montgomery County is hard, with a median of 180 mg/L (10.5 grains per gallon) across 9 monitoring sites.
Montgomery County water at a glance
- HardnessHard (180 mg/L, 10.5 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 180 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 10.5 gpg (10.1 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Montgomery County
Prefilled with Montgomery County's measured local hardness of 180 mg/L (10.5 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Montgomery County on the Illinois map
Cities and communities in Montgomery County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Litchfield | 148 | Hard | 6 sites within 10 miles |
| Hillsboro | 156 | Hard | 7 sites within 10 miles |
| Nokomis | 180 | Hard | county median |
| Raymond | 180 | Hard | county median |
| Witt | 180 | Hard | county median |
| Taylor Springs | 180 | Hard | 9 sites within 10 miles |
| Farmersville | 180 | Hard | county median |
| Coffeen | 168 | Hard | 6 sites within 10 miles |
| Schram City | 168 | Hard | 8 sites within 10 miles |
| Irving | 140 | Hard | 4 sites within 10 miles |
| Coalton | 180 | Hard | county median |
| Fillmore | 180 | Hard | county median |
| Waggoner | 180 | Hard | county median |
| Harvel | 180 | Hard | county median |
| Butler | 148 | Hard | 6 sites within 10 miles |
| Ohlman | 180 | Hard | county median |
| Walshville | 184 | Very hard | 10 sites within 10 miles |
| Wenonah | 180 | Hard | county median |
Water quality in Montgomery County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Litchfield | Litchfield | None detected | 20 lead · 0 unknown | 3 |
| Hillsboro | Hillsboro | None detected | 30 lead · 1,080 unknown | 3 |
| Nokomis | Nokomis | Not tested | 0 lead · 0 unknown | None |
| Raymond | Raymond | Not tested | 0 lead · 0 unknown | None |
| Taylor Springs | Taylor Springs | Not tested | 0 lead · 0 unknown | None |
| Farmersville | Farmersville | Not tested | 0 lead · 0 unknown | None |
| Coffeen | Coffeen | Not tested | Not reported | 2 |
| Schram City | Schram City | Not tested | 0 lead · 1 unknown | None |
| Irving | Irving | Not tested | 0 lead · 205 unknown | None |
| Coalton | EJ Water-Coalton | Not tested | 0 lead · 156 unknown | None |
| Fillmore | Fillmore | Not tested | 0 lead · 156 unknown | 1 (1 open) |
| Waggoner | Waggoner | Not tested | 0 lead · 87 unknown | 1 |
| Harvel | Harvel | Not tested | 0 lead · 0 unknown | None |
| Butler | Butler | Not tested | 0 lead · 0 unknown | 4 |
Neighboring counties
- Bond County147 mg/L
- Macoupin County170 mg/L
- Christian County214 mg/L
- Fayette County259 mg/L
- Madison County339 mg/L
- Sangamon County264 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.