Water hardness in Fraser-Fort George Region, BC

Water in Fraser-Fort George Region is moderately hard, with a median of 72 mg/L (4.2 grains per gallon) across 3 monitoring sites.

about the same as the British Columbia median (65 mg/L) 9th hardest of 21 regions
72mg/L
4.2 grains per gallon
Moderately hard

Fraser-Fort George Region water at a glance

  • HardnessModerately hard (72 mg/L, 4.2 gpg, local measurements). Some scale; descale kettles and flush the water heater.Water heater care →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 72 mg/L means at home

  • Water softener: Most homes do not need a softener. You may notice light spotting on glass and fixtures.
  • Dishwasher: set the water hardness to about 4.2 gpg (4 °dH), which is a low-to-medium hardness setting.
  • Kettles and coffee makers: descaling every 3–6 months is usually enough.
  • Laundry and soap: soap lathers easily and detergent goes further.
  • Water heater: routine flushing every 2–3 years is typically fine.

Where the number comes from

Monitoring sites3
Lab samples1,051
Sample years2000–2026
Middle 50% of sites62–76 mg/L
Surface water (rivers, lakes)72 mg/L · 3 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Environment and Climate Change Canada and the Government of Ontario. Utilities that soften or blend water may deliver different numbers, so check your utility's annual drinking water quality report for exact tap values. Methodology

Water softener and dishwasher calculator for Fraser-Fort George Region

Prefilled with Fraser-Fort George Region's measured local hardness of 72 mg/L (4.2 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Water use defaults to the Canadian average of 223 litres per person per day (Statistics Canada, 2021); softeners are rated in grains of hardness removed. Sodium uses about 8 mg/L added per grain per gallon removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Fraser-Fort George Region on the British Columbia map

East Kootenay RegionCentral Kootenay RegionKootenay Boundary RegionOkanagan-Similkameen RegionFraser Valley RegionGreater Vancouver RegionCapital RegionCowichan Valley RegionNanaimo RegionAlberni-Clayoquot RegionStrathcona RegionComox Valley RegionPowell River RegionSunshine Coast RegionSquamish-Lillooet RegionThompson-Nicola RegionCentral Okanagan RegionNorth Okanagan RegionColumbia-Shuswap RegionCariboo RegionMount Waddington RegionCentral Coast RegionSkeena-Queen Charlotte RegionKitimat-Stikine RegionBulkley-Nechako RegionPeace River RegionStikine RegionNorthern Rockies Region

Cities and communities in Fraser-Fort George Region

PlaceMedian mg/LClassBased on
Prince George 66 Moderately hard 2 sites within 25 km
Fraser-Fort George D 72 Moderately hard region median
Fraser-Fort George C 72 Moderately hard region median
Fraser-Fort George A 72 Moderately hard region median
Mackenzie 72 Moderately hard region median
Fraser-Fort George H 72 Moderately hard region median
Fraser-Fort George F 72 Moderately hard region median
Valemount 72 Moderately hard region median
McBride 72 Moderately hard region median
Fraser-Fort George E 72 Moderately hard region median
Fraser-Fort George G 72 Moderately hard region median
Fort George 2 66 Moderately hard 2 sites within 25 km
McLeod Lake 1 72 Moderately hard region median

British Columbia

The statewide median is 65 mg/L (moderately hard) from 54 sites.

British Columbia hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next