Canadian drinking water guidelines

Updated November 20, 2026 · Based on EPA and other public sources listed below · How we make our content

Short answer: Canada's drinking water limits are the Guidelines for Canadian Drinking Water Quality from Health Canada. Key values: lead 0.005 mg/L, arsenic 0.010 mg/L, nitrate 45 mg/L (10 as nitrogen), THMs 0.1 mg/L, and a PFAS objective of 30 ng/L for 25 PFAS combined. There is no guideline for hardness. Provinces and territories turn these guidelines into their own rules.

Canadian drinking water guidelines vs US EPA limits

SubstanceHealth Canada (MAC)US EPANote
Lead0.005 mg/L (5 µg/L), 2019Action level 15 µg/L (10 µg/L from Nov 2027 under the 2024 rule, challenged in court)Health Canada: removing the full lead service line is the best approach
Arsenic0.010 mg/L0.010 mg/LKept as low as reasonably achievable
Nitrate45 mg/L as nitrate (10 mg/L as nitrate-nitrogen)10 mg/L as nitrogenWell owners should test
Nitrite3 mg/L as nitrite (1 mg/L as nitrite-nitrogen)1 mg/L as nitrogenWell owners should test
Total trihalomethanes (THMs)0.1 mg/L0.080 mg/LDisinfection byproducts
Haloacetic acids (HAAs)0.08 mg/L0.060 mg/L (five HAAs)Disinfection byproducts
Uranium0.02 mg/L0.030 mg/LCanada's MAC covers chemical and radiological effects
Manganese0.12 mg/L; aesthetic objective ≤ 0.02 mg/LNo federal limit (secondary guideline 0.05 mg/L)Aesthetic objective is about discoloured water and stains
Fluoride1.5 mg/L4.0 mg/LHealth Canada notes fluoride helps prevent tooth decay
PFASObjective 30 ng/L for the sum of 25 PFAS (2024)4 ng/L (ppt) each for PFOA and PFOS; limits for other PFAS proposed for withdrawalDifferent approaches: a sum vs individual chemicals
E. coliNone detectable per 100 mLGoal of zero; violations defined by the Revised Total Coliform RuleSign of fecal contamination
HardnessNo guidelineNo federal limitAffects scale, soap and appliances, not a health limit

MAC = maximum acceptable concentration. Health Canada values from its summary table published December 2025; check it for the full list and the latest values.

How the guidelines are used

Health Canada develops the guidelines with the provinces and territories, which are responsible for drinking water in their jurisdictions and write them into their own regulations. Your municipality's water reports compare its results with these values. Private well owners are responsible for their own water; Health Canada's table specifically says well owners should test for nitrate and nitrite.

More on each topic

On a private well? See how often to test well water in Canada.

Drilled well in bedrock? Read about uranium in well water.

Frequently asked questions

What are the Canadian drinking water guidelines?

The Guidelines for Canadian Drinking Water Quality, published by Health Canada with the provinces and territories. They set maximum acceptable concentrations (MACs) for substances in drinking water; provinces and territories use them in their own rules.

Is there a guideline for water hardness in Canada?

No. Health Canada's summary table says a guideline value is not necessary for calcium, which contributes to hardness.

What is Canada's PFAS objective for drinking water?

An objective of 30 ng/L (0.00003 mg/L) for the sum of 25 specified PFAS, set in 2024. Health Canada says it is based on what analysis and treatment can achieve.

Are Canadian drinking water standards stricter than US standards?

It depends on the substance. Canada's lead guideline (5 µg/L) is lower than the US action level (15 µg/L), while the US limits for trihalomethanes and haloacetic acids are lower than Canada's. Arsenic is the same (0.010 mg/L).

Sources

Related guides