Water hardness in Columbia-Shuswap Region, BC
Water in Columbia-Shuswap Region is moderately hard, with a median of 104 mg/L (6.1 grains per gallon) across 6 monitoring sites.
Columbia-Shuswap Region water at a glance
- HardnessModerately hard (104 mg/L, 6.1 gpg, local measurements). Some scale; descale kettles and flush the water heater.Water heater care →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 104 mg/L means at home
- Water softener: Most homes do not need a softener. You may notice light spotting on glass and fixtures.
- Dishwasher: set the water hardness to about 6.1 gpg (5.8 °dH), which is a low-to-medium hardness setting.
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Environment and Climate Change Canada and the Government of Ontario. Utilities that soften or blend water may deliver different numbers, so check your utility's annual drinking water quality report for exact tap values. Methodology
Water softener and dishwasher calculator for Columbia-Shuswap Region
Prefilled with Columbia-Shuswap Region's measured local hardness of 104 mg/L (6.1 gpg). If your water bill or utility report gives a different number, enter it instead.
Water use defaults to the Canadian average of 223 litres per person per day (Statistics Canada, 2021); softeners are rated in grains of hardness removed. Sodium uses about 8 mg/L added per grain per gallon removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Columbia-Shuswap Region on the British Columbia map
Cities and communities in Columbia-Shuswap Region
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Salmon Arm | 123 | Hard | 2 sites within 25 km |
| Columbia-Shuswap C | 123 | Hard | 2 sites within 25 km |
| Revelstoke | 104 | Moderately hard | region median |
| Columbia-Shuswap D | 104 | Moderately hard | region median |
| Golden | 104 | Moderately hard | region median |
| Columbia-Shuswap A | 104 | Moderately hard | region median |
| Columbia-Shuswap F | 104 | Moderately hard | region median |
| Sicamous | 104 | Moderately hard | region median |
| Columbia-Shuswap E | 104 | Moderately hard | region median |
| Columbia-Shuswap B | 104 | Moderately hard | region median |
| Quaaout 1 | 104 | Moderately hard | region median |
| Switsemalph | 123 | Hard | 2 sites within 25 km |
| Okanagan (Part) 1 (Indian Reserve) | 104 | Moderately hard | region median |
| Switsemalph 3 | 123 | Hard | 2 sites within 25 km |
| Chum Creek 2 | 104 | Moderately hard | region median |
| North Bay 5 | 123 | Hard | 2 sites within 25 km |
| Hustalen 1 | 104 | Moderately hard | region median |
| Scotch Creek 4 | 104 | Moderately hard | region median |
| Salmon River 1 | 104 | Moderately hard | region median |
Neighboring regions
- North Okanagan Region50 mg/L
- Central Kootenay Region108 mg/L
- Thompson-Nicola Region45 mg/L
- Central Okanagan Region81 mg/L
- East Kootenay Region160 mg/L
- Kootenay Boundary Region68 mg/L
British Columbia
The statewide median is 65 mg/L (moderately hard) from 54 sites.
British Columbia hardness map →Hardness scale
What to read next
- Lead in drinking water in CanadaHealth Canada's 5 µg/L guideline and how to check for lead pipes.
- Canadian drinking water guidelinesHealth Canada's limits for lead, nitrate, PFAS and more, vs the US.
- Well water testing in CanadaHow often to test a private well and for what, per Health Canada.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.