Water hardness in Lancaster County, VA
Water in Lancaster County is soft, with a median of 36 mg/L (2.1 grains per gallon) across 8 monitoring sites.
Lancaster County water at a glance
- HardnessSoft (36 mg/L, 2.1 gpg, local measurements). A water softener isn't needed.Water heater care →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 36 mg/L means at home
- Water softener: A water softener is generally not needed. Soft water rarely causes scale.
- Dishwasher: set the water hardness to about 2.1 gpg (2 °dH), which is the lowest hardness setting (or softener off).
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Lancaster County
Prefilled with Lancaster County's measured local hardness of 36 mg/L (2.1 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Lancaster County on the Virginia map
Cities and communities in Lancaster County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Kilmarnock | 32 | Soft | 9 sites within 10 miles |
| Irvington | 36 | Soft | 8 sites within 10 miles |
| White Stone | 32 | Soft | 5 sites within 10 miles |
| Lancaster (CDP) | 32 | Soft | 10 sites within 10 miles |
| Weems (CDP) | 36 | Soft | 8 sites within 10 miles |
Water quality in Lancaster County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Kilmarnock | Town of Kilmarnock | Not tested | 0 lead · 0 unknown | None |
| White Stone | White Stone | Not tested | 0 lead · 162 unknown | None |
| Weems | Weems | Not tested | 0 lead · 196 unknown | None |
Neighboring counties
- Middlesex County25 mg/L
- Northumberland County10 mg/L
- Mathews County243 mg/L
- Gloucester County11 mg/L
- Richmond County19 mg/L
- King and Queen County27 mg/L
Hardness scale
What to read next
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.