Water hardness in Sullivan County, TN
Water in Sullivan County is very hard, with a median of 236 mg/L (13.8 grains per gallon) across 121 monitoring sites.
Sullivan County water at a glance
- HardnessVery hard (236 mg/L, 13.8 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 236 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 13.8 gpg (13.2 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Sullivan County
Prefilled with Sullivan County's measured local hardness of 236 mg/L (13.8 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Sullivan County on the Tennessee map
Cities and communities in Sullivan County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Kingsport | 242 | Very hard | 81 sites within 10 miles |
| Bristol | 241 | Very hard | 50 sites within 10 miles |
| Bloomingdale (CDP) | 248 | Very hard | 55 sites within 10 miles |
| Colonial Heights (CDP) | 242 | Very hard | 95 sites within 10 miles |
| Spurgeon (CDP) | 248 | Very hard | 110 sites within 10 miles |
| Blountville (CDP) | 244 | Very hard | 73 sites within 10 miles |
| Walnut Hill (CDP) | 230 | Very hard | 56 sites within 10 miles |
| Bluff City | 188 | Very hard | 94 sites within 10 miles |
| Orebank (CDP) | 244 | Very hard | 81 sites within 10 miles |
| Sullivan Gardens (CDP) | 242 | Very hard | 77 sites within 10 miles |
Water quality in Sullivan County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Kingsport | Kingsport Water Dept | 1 found (PFOA ND / PFOS 5.9 ppt) | 0 lead · 27,457 unknown | None |
| Bristol | Bristol Deptartment of Utilities | None detected | 0 lead · 9,488 unknown | None |
| Bloomingdale | Bloomingdale Utility District | 1 found (PFOA ND / PFOS 4.3 ppt) | 0 lead · 827 unknown | 1 |
| Blountville | Blountville Utility District | None detected | 0 lead · 0 unknown | None |
| Bluff City | Bluff City Water Department | Not tested | 0 lead · 705 unknown | None |
Neighboring counties
- Washington County248 mg/L
- Carter County31 mg/L
- Johnson County39 mg/L
- Unicoi County14 mg/L
- Hawkins County133 mg/L
- Greene County254 mg/L
Tennessee
The statewide median is 98 mg/L (moderately hard) from 3,359 sites.
Tennessee hardness map →Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.