Water hardness in Sullivan County, NH
Water in Sullivan County is soft, with a median of 36 mg/L (2.1 grains per gallon) across 19 monitoring sites.
Sullivan County water at a glance
- HardnessSoft (36 mg/L, 2.1 gpg, local measurements). A water softener isn't needed.Water heater care →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 36 mg/L means at home
- Water softener: A water softener is generally not needed. Soft water rarely causes scale.
- Dishwasher: set the water hardness to about 2.1 gpg (2 °dH), which is the lowest hardness setting (or softener off).
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Sullivan County
Prefilled with Sullivan County's measured local hardness of 36 mg/L (2.1 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Sullivan County on the New Hampshire map
Cities and communities in Sullivan County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Claremont | 47 | Soft | 14 sites within 10 miles |
| Newport (CDP) | 16 | Soft | 7 sites within 10 miles |
| Charlestown (CDP) | 18 | Soft | 13 sites within 10 miles |
| Plainfield (CDP) | 47 | Soft | 14 sites within 10 miles |
Water quality in Sullivan County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Claremont | Claremont Water Dept | None detected | 220 lead · 1,348 unknown | 1 |
| Newport | Newport Water Works | None detected | 0 lead · 1,494 unknown | None |
| Charlestown | Charlestown Water Works | Not tested | 0 lead · 1,304 unknown | None |
| Plainfield | Plainfield Water Dept | Not tested | 0 lead · 118 unknown | None |
Neighboring counties
- Merrimack County15 mg/L
- Cheshire County16 mg/L
- Hillsborough County19 mg/L
- Belknap County14 mg/L
- Grafton County15 mg/L
- Strafford County12 mg/L
Hardness scale
What to read next
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.