Water hardness in Sheridan County, NE
Water in Sheridan County is moderately hard, with a median of 102 mg/L (5.9 grains per gallon) across 6 monitoring sites.
Sheridan County water at a glance
- HardnessModerately hard (102 mg/L, 5.9 gpg, local measurements). Some scale; descale kettles and flush the water heater.Water heater care →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 102 mg/L means at home
- Water softener: Most homes do not need a softener. You may notice light spotting on glass and fixtures.
- Dishwasher: set the water hardness to about 5.9 gpg (5.7 °dH), which is a low-to-medium hardness setting.
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Sheridan County
Prefilled with Sheridan County's measured local hardness of 102 mg/L (6 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Sheridan County on the Nebraska map
Cities and communities in Sheridan County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Gordon | 102 | Moderately hard | county median |
| Rushville | 102 | Moderately hard | county median |
| Hay Springs | 102 | Moderately hard | county median |
| Clinton | 102 | Moderately hard | county median |
| White Clay (CDP) | 102 | Moderately hard | county median |
Water quality in Sheridan County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Gordon | City of Gordon | Not tested | 0 lead · 519 unknown | 1 |
| Rushville | City of Rushville | Not tested | 0 lead · 454 unknown | None |
| Hay Springs | City of Hay Springs | Not tested | 0 lead · 18 unknown | None |
Neighboring counties
- Dawes County114 mg/L
- Box Butte County223 mg/L
- Grant County64 mg/L
- Garden County259 mg/L
- Morrill County224 mg/L
- Cherry County86 mg/L
Hardness scale
What to read next
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.