Water hardness in Howard County, NE
Water in Howard County is hard, with a median of 128 mg/L (7.5 grains per gallon) across 3 monitoring sites.
Howard County water at a glance
- HardnessHard (128 mg/L, 7.5 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 128 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 7.5 gpg (7.2 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Howard County
Prefilled with Howard County's measured local hardness of 128 mg/L (7.5 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Howard County on the Nebraska map
Cities and communities in Howard County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| St. Paul | 128 | Hard | 3 sites within 10 miles |
| Dannebrog | 172 | Hard | 5 sites within 10 miles |
| St. Libory (CDP) | 128 | Hard | county median |
| Elba | 128 | Hard | 3 sites within 10 miles |
| Howard City (Boelus) | 252 | Very hard | 8 sites within 10 miles |
| Farwell | 128 | Hard | county median |
| Cushing | 178 | Hard | 4 sites within 10 miles |
| Cotesfield | 128 | Hard | county median |
Water quality in Howard County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| St. Paul | City of ST Paul | Not tested | 7 lead · 88 unknown | None |
| Dannebrog | Village of Dannebrog | Not tested | 0 lead · 0 unknown | None |
| Elba | Village of Elba | Not tested | 1 lead · 1 unknown | None |
| Farwell | Village of Farwell | Not tested | 0 lead · 0 unknown | None |
Neighboring counties
- Sherman County233 mg/L
- Hall County310 mg/L
- Merrick County285 mg/L
- Nance County303 mg/L
- Valley County332 mg/L
- Hamilton County360 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.