Water hardness in Summerside, PE
Water in Summerside is moderately hard, with a median of 116 mg/L (6.8 grains per gallon) across Prince Region.
There are not enough monitoring sites within 25 km of Summerside, so this page uses the Prince Region median.
Summerside tap water at a glance
- HardnessModerately hard (116 mg/L, 6.8 gpg, local measurements). Some scale; descale kettles and flush the water heater.Water heater care →
- GuidelinesHealth Canada's lead guideline is 5 µg/L; there is no guideline for hardness.Canadian guidelines →
What 116 mg/L means at home
- Water softener: Most homes do not need a softener. You may notice light spotting on glass and fixtures.
- Dishwasher: set the water hardness to about 6.8 gpg (6.5 °dH), which is a low-to-medium hardness setting.
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Environment and Climate Change Canada and the Government of Ontario. Utilities that soften or blend water may deliver different numbers, so check your utility's annual drinking water quality report for exact tap values. Methodology
Water softener and dishwasher calculator for Summerside
Prefilled with Summerside's measured local hardness of 116 mg/L (6.8 gpg). If your water bill or utility report gives a different number, enter it instead.
Water use defaults to the Canadian average of 223 litres per person per day (Statistics Canada, 2021); softeners are rated in grains of hardness removed. Sodium uses about 8 mg/L added per grain per gallon removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Monitoring sites closest to Summerside
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| Wilmot River Near Kelvin Grove Environment and Climate Change Canada | River Or Stream | 10.1 km | 131 mg/L | 80 | 2000–2008 |
Water hardness in towns near Summerside
| Town | Distance | Median | Class |
|---|---|---|---|
| Three Rivers | 92 km | 86 mg/L | Moderately hard |
Prince Region
Summerside is in Prince Region, where the median is 116 mg/L (moderately hard) across 2 sites.
See all of Prince Region →Prince Edward Island
The statewide median is 100 mg/L (moderately hard) from 3 sites.
Prince Edward Island hardness map →Hardness scale
What to read next
- Lead in drinking water in CanadaHealth Canada's 5 µg/L guideline and how to check for lead pipes.
- Canadian drinking water guidelinesHealth Canada's limits for lead, nitrate, PFAS and more, vs the US.
- Well water testing in CanadaHow often to test a private well and for what, per Health Canada.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.