Water hardness in Region 4, NT
Water in Region 4 is very hard, with a median of 200 mg/L (11.7 grains per gallon) across 12 monitoring sites.
Region 4 water at a glance
- HardnessVery hard (200 mg/L, 11.7 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 200 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 11.7 gpg (11.2 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Environment and Climate Change Canada and the Government of Ontario. Utilities that soften or blend water may deliver different numbers, so check your utility's annual drinking water quality report for exact tap values. Methodology
Water softener and dishwasher calculator for Region 4
Prefilled with Region 4's measured local hardness of 200 mg/L (11.7 gpg). If your water bill or utility report gives a different number, enter it instead.
Water use defaults to the Canadian average of 223 litres per person per day (Statistics Canada, 2021); softeners are rated in grains of hardness removed. Sodium uses about 8 mg/L added per grain per gallon removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Region 4 on the Northwest Territories map
Cities and communities in Region 4
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Fort Simpson | 200 | Very hard | region median |
| Fort Providence | 200 | Very hard | region median |
| Fort Liard | 200 | Very hard | region median |
| Hay River Dene 1 | 200 | Very hard | region median |
| Wrigley | 200 | Very hard | region median |
| Sambaa K’e | 200 | Very hard | region median |
| Nahanni Butte | 200 | Very hard | region median |
| Jean Marie River | 200 | Very hard | region median |
| Kakisa | 200 | Very hard | region median |
Northwest Territories
The statewide median is 164 mg/L (hard) from 21 sites.
Northwest Territories hardness map →Hardness scale
What to read next
- Lead in drinking water in CanadaHealth Canada's 5 µg/L guideline and how to check for lead pipes.
- Canadian drinking water guidelinesHealth Canada's limits for lead, nitrate, PFAS and more, vs the US.
- Well water testing in CanadaHow often to test a private well and for what, per Health Canada.
- Do you need a water softener?Water here is very hard; size a softener with our calculator.