Water hardness in Union County, OH
Water in Union County is very hard, with a median of 333 mg/L (19.5 grains per gallon) across 98 monitoring sites.
Union County water at a glance
- HardnessVery hard (333 mg/L, 19.5 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 333 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 19.5 gpg (18.7 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Union County
Prefilled with Union County's measured local hardness of 333 mg/L (19.5 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Union County on the Ohio map
Cities and communities in Union County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Marysville | 326 | Very hard | 86 sites within 10 miles |
| Plain City | 340 | Very hard | 85 sites within 10 miles |
| Richwood | 347 | Very hard | 44 sites within 10 miles |
| New California (CDP) | 318 | Very hard | 76 sites within 10 miles |
| Milford Center | 348 | Very hard | 102 sites within 10 miles |
| Magnetic Springs | 332 | Very hard | 58 sites within 10 miles |
| Raymond (CDP) | 346 | Very hard | 71 sites within 10 miles |
| Unionville Center | 348 | Very hard | 87 sites within 10 miles |
Water quality in Union County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Marysville | Marysville City PWS | None detected | 23 lead · 738 unknown | None |
| Richwood | Richwood Village PWS | Not tested | 0 lead · 881 unknown | 1 |
| Milford Center | Milford Center Village PWS | Not tested | 0 lead · 360 unknown | None |
Neighboring counties
- Delaware County303 mg/L
- Logan County363 mg/L
- Marion County331 mg/L
- Champaign County366 mg/L
- Madison County349 mg/L
- Franklin County277 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.