Water hardness in McLean County, ND
Water in McLean County is very hard, with a median of 254 mg/L (14.9 grains per gallon) across 29 monitoring sites.
McLean County water at a glance
- HardnessVery hard (254 mg/L, 14.9 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 254 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 14.9 gpg (14.2 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for McLean County
Prefilled with McLean County's measured local hardness of 254 mg/L (14.9 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
McLean County on the North Dakota map
Cities and communities in McLean County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Garrison | 210 | Very hard | 7 sites within 10 miles |
| Washburn | 254 | Very hard | county median |
| Underwood | 266 | Very hard | 5 sites within 10 miles |
| Turtle Lake | 254 | Very hard | county median |
| White Shield (CDP) | 254 | Very hard | county median |
| Max | 254 | Very hard | county median |
| Riverdale | 210 | Very hard | 16 sites within 10 miles |
| Mercer | 254 | Very hard | county median |
| Butte | 254 | Very hard | county median |
| Benedict | 254 | Very hard | county median |
| Coleharbor | 253 | Very hard | 17 sites within 10 miles |
| Ruso | 254 | Very hard | county median |
Water quality in McLean County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Garrison | City of Garrison | Not tested | 18 lead · 734 unknown | None |
| Washburn | City of Washburn | Not tested | 16 lead · 424 unknown | None |
| Underwood | City of Underwood | Not tested | 1 lead · 408 unknown | None |
| Turtle Lake | City of Turtle Lake | Not tested | 0 lead · 140 unknown | None |
| Max | City of Max | Not tested | 0 lead · 157 unknown | 2 |
| Riverdale | City of Riverdale | Not tested | 1 lead · 160 unknown | None |
| Mercer | City of Mercer | Not tested | 0 lead · 88 unknown | None |
| Coleharbor | City of Coleharbor | Not tested | 0 lead · 56 unknown | None |
Neighboring counties
- Mercer County223 mg/L
- Oliver County621 mg/L
- Ward County419 mg/L
- Sheridan County784 mg/L
- McHenry County394 mg/L
- Mountrail County234 mg/L
North Dakota
The statewide median is 368 mg/L (very hard) from 747 sites.
North Dakota hardness map →Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.