Water hardness in Henry County, MO
Water in Henry County is very hard, with a median of 368 mg/L (21.5 grains per gallon) across 14 monitoring sites.
Henry County water at a glance
- HardnessVery hard (368 mg/L, 21.5 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 368 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 21.5 gpg (20.6 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Henry County
Prefilled with Henry County's measured local hardness of 368 mg/L (21.5 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Henry County on the Missouri map
Cities and communities in Henry County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Clinton | 872 | Very hard | 3 sites within 10 miles |
| Windsor | 447 | Very hard | 8 sites within 10 miles |
| Urich | 368 | Very hard | county median |
| Calhoun | 528 | Very hard | 10 sites within 10 miles |
| Montrose | 763 | Very hard | 4 sites within 10 miles |
| Deepwater | 207 | Very hard | 3 sites within 10 miles |
| Blairstown | 210 | Very hard | 4 sites within 10 miles |
| Brownington | 207 | Very hard | 3 sites within 10 miles |
| Tightwad | 368 | Very hard | county median |
| La Due | 368 | Very hard | county median |
| Hartwell (CDP) | 368 | Very hard | county median |
Water quality in Henry County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Clinton | Henry County Water Company | 1 found | 18 lead · 3,848 unknown | None |
| Windsor | Windsor PWS | Not tested | 10 lead · 1 unknown | None |
| Urich | Urich PWS | Not tested | 0 lead · 244 unknown | None |
| Calhoun | Calhoun PWS | Not tested | 0 lead · 0 unknown | 3 |
| Montrose | Montrose PWS | Not tested | 0 lead · 214 unknown | None |
| Deepwater | Deepwater PWS | Not tested | 0 lead · 1 unknown | 2 |
| Blairstown | Blairstown PWS | Not tested | 0 lead · 69 unknown | 6 |
| Tightwad | Henry County PWSD 3 | Not tested | 0 lead · 4 unknown | 3 |
Neighboring counties
- St. Clair County284 mg/L
- Johnson County200 mg/L
- Benton County281 mg/L
- Bates County171 mg/L
- Cass County238 mg/L
- Pettis County192 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.